Mouse Scroll Wheel & Rotary Encoder Diagnostic Test
Sub-millisecond precision hardware diagnostics running directly in your browser.
Rotary Reverse-Jump Detector
Detects dust or worn rotary wheel encoders that cause stuttering or jumping in reverse when scrolling.
Come Usare: Mouse Scroll Wheel & Rotary Encoder Diagnostic Test
Scroll Down Smoothly
Roll the wheel downward in continuous, deliberate steps. Watch the down counter increment.
Check for Reverse Jumps (Rev)
Notice the "Rev" counter. If rolling down causes an accidental jump upward, a reverse slip defect is recorded.
Scroll Up Smoothly
Roll the wheel upward and verify that all notch signals register upward consistently.
Test Scroll Click (Middle Button)
Press straight down on the scroll wheel to test middle-click switch actuation and hold pressure.
Rotary Encoders, Optical Wheels & The Reverse Jumping Defect
Most computer mice use a mechanical rotary encoder (TTC, ALPS, Kailh, F-Switch). Inside, tiny copper sweeping arms slide across alternating conductive contacts. Over time, desk dust and factory lubricating grease contaminate these contacts, causing the encoder to register false reversed pulses.
Benchmark di Riferimento e Target Ideali
100% consistent forward/backward direction tracking.
Occasional reverse slips caused by minor dust ingress.
Worn or oxidized encoder tracks requiring cleaning or replacement.
⚠️ Difetti Hardware Rilevati
- • Dirty rotary encoder tracks producing erratic reverse jumping while scrolling long web pages.
- • Loose wheel axle stem slipping inside the encoder core without registering rotation.
- • Stiff or unresponsive middle click switch requiring excessive finger force.
💡 Consigli Pro e Manutenzione
- ✓ Spray compressed air directly into the wheel gap while rolling it vigorously.
- ✓ Apply 1–2 drops of electrical contact cleaner into the encoder housing and scroll 100 times.
- ✓ Mice with optical encoders (Razer Basilisk, Roccat Titan) are immune to dirty contact bounce.
FAQ su Mouse Scroll Wheel & Rotary Encoder Diagnostic Test
Why does my scroll wheel jump up when I scroll down? ▼
The mechanical copper contacts inside the encoder have become contaminated with dust or lubricating grease, causing phase signal bouncing.
Can I fix a jumping scroll wheel without opening the mouse? ▼
Yes! In many cases, blowing compressed air into the wheel slot while rolling the wheel quickly dislodges loose dust particles.